鋁卷是非常常見的一種產品，又因質地可彎曲，所以在存放和安裝的時候都比較方便，因此受到很多人的喜愛。那么鋁卷保溫的注意事項有哪些呢？下面，鋁卷生產廠家帶大家一起來看看吧。
Aluminum coil is a very common product, and because of its flexible texture, it is convenient to store and install, so it is loved by many people. What are the precautions for aluminum coil insulation? Next, let's take a look at the aluminum coil manufacturer.
在進行保溫的過程中，鋁卷可以起到兩個很重要的作用，一可以起到對材料的保護作用，保溫性的材料在使用過程中可能會受到溫度的沖擊導致損壞，而這時鋁卷就有很好的保護作用。二個是控制性，因為鋁卷受到外界溫度的影響比較大，這就導致鋁卷在室外的效果會大大降低，而在室內使用時就可以很好的把它控制起來。
In the process of thermal insulation, the aluminum coil can play two very important roles. One is to protect the material. The thermal insulation material may be damaged by the impact of temperature in the process of use. At this time, the aluminum coil has good protection. The second is controllability. Because the aluminum coil is greatly affected by the external temperature, the effect of the aluminum coil outdoors will be greatly reduced, and it can be well controlled when it is used indoors.
此外，在低溫的環境中還可以防止管道、設備被凍裂、凍壞，因有較好的隔熱、保溫的效果，因此可以延長采暖的時間。在一般的工序中，設備會對管道行加熱，又因鋁卷的保護，可以很好的將暖氣流分給其他的空間，這樣不僅可以減少能耗，還能提高室內的溫度。
In addition, in the low-temperature environment, it can also prevent the pipes and equipment from being cracked and damaged by freezing. Because it has good heat insulation and insulation effect, it can prolong the heating time. In the general process, the equipment will heat the pipeline first, and because of the protection of the aluminum coil, the heating flow can be well distributed to other spaces. This can not only reduce energy consumption, but also improve the indoor temperature.

安裝的密封和穩固是非常重要的兩個方面，密封材質需要考慮到高溫條件下的效果，如果粘結處不夠穩固，這樣就不能將鋁卷的效果發揮出來。
The sealing and stability of the installation are two very important aspects. The sealing material needs to consider the effect under high temperature conditions. If the bonding is not stable enough, the effect of the aluminum coil cannot be exerted.
鋁卷生產廠家
Aluminum coil manufacturer
此外要注意鋁卷的防腐和抗氧化措施，比如：
In addition, pay attention to the anti-corrosion and anti-oxidation measures of aluminum coils, such as:
（1）加強空氣干燥管理，確保壓縮空氣中沒有水。
(1) Strengthen air drying management to ensure that there is no water in the compressed air.
（2）加強軋制油管理，含水率控制在0.04％以下。
(2) Strengthen the management of rolling oil and control the water content below 0.04%.
（3）鋁箔卷的包裝應密封，每卷中應放入適量的干燥劑。
(3) The package of aluminum foil roll shall be sealed, and an appropriate amount of desiccant shall be put into each roll.
（4）包裝的木軸和箱板的濕度不超過18％，包裝的鋁卷的溫度不超過45°C。
(4) The humidity of the packed wooden shaft and box plate shall not exceed 18%, and the temperature of the packed aluminum coil shall not exceed 45 ° C.
（5）從低溫區域運輸到高溫高濕的地方時，請勿立即打開密封包裝。
(5) When transporting from a low-temperature area to a place with high temperature and humidity, do not open the sealed package immediately.
（6）如果車間或倉庫的屋頂上有雨或雪，則不應放置鋁卷。
(6) If there is rain or snow on the roof of the workshop or warehouse, aluminum coils shall not be placed.
以上就是關于鋁卷保溫的注意事項有哪些的介紹了，希望可以給到大家一些參考。您對該材料的使用或者什么有疑問的話，歡迎來到我們網站http://www.aepan.cn進行咨詢了解。
The above is about the precautions for aluminum coil insulation. I hope it can give you some reference. If you have any questions about the use of this material, please come to our website http://www.aepan.cn Consult and understand.